Filter
Top Products
91
Various Shooting Functions
1
You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is set
to [OFF].
1
Display the shooting setting menu.
• For the operating procedure, see P.68.
2
Press the " button to select [CAMERA SHAKE COR]
and press the $ button.
3
Press the !" buttons to select
[ON].
4
Press the MENU/OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• The camera shake correction function is not available during multi-shot shooting, long
time exposure and movie shooting. If multi-shot shooting or long time exposure is set
while the camera shake correction function is turned on, E changes to F. E
disappears when 3 [MOVIE] is selected from the scene mode.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
• Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (GP.19)
Using the Camera Shake Correction
Function to Prevent Camera Shake
(CAMERA SHAKE COR)