Filter
Top Products
7
Downloading All Images
Using the DL‑10 Software
DL-10 automatically creates a folder called
[Digital Camera] inside your [My Documents]
folder. Downloaded images are saved in
folders with the date of each shot, inside the
[Digital Camera] folder. (The files will continue
to be saved in the [Caplio] folder if you were
previously using Caplio Software.)
Set the correct date and time on the camera
before shooting.
1.
Make sure that the camera power is
off.
2.
Connect the USB cable to the USB
port of your computer.
3.
Connect the USB cable to the USB
terminal of your camera.
The camera turns on, DL-10 starts, and the
DL-10 window appears.
Image transfer begins automatically.
If image transfer does not begin, please try
the following procedures:
• Click the [Save] button in the DL-10
window.
• Restart your computer and perform
Steps 1 to 3 again.
• Confirm that the [Saves automatically
when connected to USB] checkbox in the
[Option settings] dialog box for DL-10 is
selected.
• When the [The same image will not be saved]
check box is selected in DL-10 [Option settings]
(GP.11), the total number of files that can
be transferred at one time is 999. To transfer
1000 files or more, transfer 999 files first and
then click [OK] when the dialog box with the
number of remaining files appears. After that,
click the [Save] button in the DL-10 window
or reconnect the USB cable to transfer the
remaining files.
• Do not turn off the camera or disconnect
the USB cable during image transfer using
DL-10 (when the message for receiving data is
displayed).
• The images on the computer are renamed
using consecutive file numbers; the file names
assigned by the camera are not used.
• Even when the storage folder is changed, the
file number will be continuous. The number
cannot be initialized.
• When transferring images to a computer
using DL-10, the files are assigned names like
[RIMG****.jpg] (**** indicates the number of
the image), even if [Card Sequence No.] is set
to [On].
• For details about DL-10, see P.9.
• For details about the DL-10 [Option settings]
dialog box, see
P.11.
• To disconnect the camera from your computer,
see
P.9.