Filter
Top Products
042
Checking the focus
Fixing the Focus
If your subject is outside the Focusing Area (AF Point), fi rst focus the subject in
the Focusing Area (AF Point) and then make a change to the composition.
1. Frame the desired composition for your
picture in the viewfi nder.
2. Centre the subject to focus in the
viewfi nder and press the shutter release
button halfway. The focus indicator (
)
appears and you will hear a beep when the
subject comes into focus (if it (
)
is
blinking, the subject is not in focus).
3. Keep pressing the shutter button halfway.
- Focus will be fi xed unless you release the shutter button.
4. Re-compose the picture while keeping the
shutter release button pressed halfway.
5. Press the shutter button fully. The picture is taken.
● The focus is locked while the focus indicator ( ) is lit.
● Turning the zooming ring in focus lock mode may cause the subject to
be out of focus.
● You can disable the beep sound through the [Beep] menu in the
[SETUP MENU].
● To fi x the exposure on your subject, press and hold the shutter button
at halfway to focus and then press the AE-L button (
).
(The exposure is fi xed until you fi re the shutter button.)
The focus indicator is blinking.