Filter
Top Products
059
Using the Menu
Memory of Settings
You can select which settings to save when the camera is turned off.
Drive
White Balance
ISO Sensitivity
EV Compensation
Flash
Extended Bracket
Playback Display
Flash power
The settings are maintained
when the camera is turned off.
The settings are reset when
the camera is turned off.
File No.
New files are named using
numbers that follow the
previous sequence, even
when a new memory card is
used, or after formatting, or
after deleting all pictures.
After using the reset function,
the next file name will be set
from 0001 even after
formatting, deleting all or
inserting a new memory card.
OIS (Optical Image Stabilization)
OIS (Optical image Stabilization) helps
the user capture sharp images by
reducing camera shake/vibration. Optical
Image Stabilization is especially useful when
using a low shutter speed which may cause
camera shake.
If you use the lens that does not support the automatic information about
the focal length, you can manually select the available focal length to enable
the OIS function.
1. Select [ OIS] menu in the [CAPTURE MENU].
2. Press the direction buttons (◄►) on your
camera to set the [Focal Length]. Select
from the following focal length values.
Focal
Length
8 1
0 12 15 18 20 24 28 30 35
40 4
5 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800 - - - - - -
● If the focal length for your lens is not listed above, select the value closest
to the actual focal length.
● When using a zoom lens, select the actual focal length at the zoom setting
in the same manner.
CAPTURE MENU
: Move
: Exit
User Registration
Interval Shooting
Extended Bracket
Multi Exposure
Memory of Settings
OIS
Off
Off
Auto
Memory of Settings
: Set : Back
Drive
White Balance
ISO Sensitivity
EV Compensation
Flash
Extended Bracket
Optical Image Stabilization
: Set : Back
Focal Length
30 35 40
CAPTURE MENU
: Move : Exit
User Registration
Interval Shooting
Extended Bracket
Multi Exposure
Memory of Settings
OIS
Off
Off
Auto