Filter
Top Products
098
Using the Built-in Flash
If you wish to discharge the fl ash in a dark or backlit location, press the fl ash button
( ) to pop up the fl ash. Select a [Flash] mode to suit your purpose from the Flash
options screen in the Fn menu. You can adjust the fl ash output with the rear dial
(
) in any Exposure mode other than Auto mode. The built-in fl ash is optimum
from about 0.7 m to 4 m from the subject. Exposure will not be properly controlled
and vignetting may occur when used at a distance closer than 0.7 m. This distance
varies slightly depending on the lens being used and set sensitivity).
Compatibility of built-in fl ash and lens
Vignetting (darkening of the corners of the image due to a lack of light) may occur
depending on the lens being used and the capture conditions. We recommend taking
a test shot to confi rm this.
● When using the built-in fl ash, remove the lens hood before shooting.
● The built-in fl ash fully discharges for lenses without a function to set
aperture lens ring to A (Auto).
Auto Discharges the fl ash automatically in dark or backlit locations.
Fill-In
The built-in fl ash discharges manually. When the pop-up
fl ash is closed, the fl ash doesn’t discharge. When the fl ash is
opened, the fl ash will discharge.
Auto +Red-eye
Lights a red-eye reduction light before automatic fl ash.
Fill-In +
Red-eye
The built-in fl ash discharges manually. Lights a red-eye
reduction light before manual fl ash.
1st Curtain Sync.
Sets the shutter speed to capture the background clearly.
1st Curtain
+
Red-eye
The lights a red-eye reduction light before automatic fl ash.
2nd Curtain Sync.
Discharges fl ash immediately before closing the shutter curtain.
Wireless Mode
Controls external fl ash(SEF-54PZF or SEF-36PZF) through
wireless connection and fi res the built-in fl ash as master. (or the
controller.)
Selecting Flash Mode
1. Press the Fn button.
- The Fn menu appears.
2. Press the direction button (▼) on your
camera.
- The fl ash options screen appears.
3. Press the direction buttons (◄►) to select
[FLASH] mode.
- Pressing the green button ( ) resets the
exposure value if you have made the
exposure compensation to the fl ash.
4. Press the OK button twice.
- The camera returns to a capture mode.
: Exit
: Move
: Set
Fill-In
FLASH
: Set
Fill-In + Red-eye
FLASH