Filter
Top Products
4
Move
OK
Select
MENU
Exit
M.Cam Mode
►Memory
Photo Quality
File No.
►Super Fine
►Series
6
Move
OK
Select
MENU
Exit
Series
Reset
M.Cam Mode
►Memory
Photo Quality
File No.
ENGLISH
96
Digital Still Camera Mode
Setting the File Number (File No.)
File Number setting works only in M.Cam Mode.
page 26
File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.
File numbers may be set as follows:
- <Series>: When there are existing files, the new image will be named as the next number in the sequence.
- <Reset>: When there are no files stored on the Memory Card, the file numbering starts from 0001.
1. Set the
[Mode] switch to [CARD].
2. Set the
[Power] switch to [ (Camera)].
3. Press the
[MENU] button.
The menu list will appear.
4. Move the [Joystick] up or down to select <Memory>, then press the [Joystick(OK)].
5. Move the
[Joystick] up or down to select <File No.>, then press the [Joystick(OK)].
6. Move the
[Joystick] up or down to select desired option (Series or Reset), then press
the [Joystick(OK)].
The selected option is applied.
7. To exit, press the
[MENU] button.