Filter
Top Products
ENGLISH
89
DVD Camcorder: Connection
Viewing Recordings on TV
The Playback function works only in Player Mode.
page 26
Playing back on a TV Monitor
To play back a disc, the television must be NTSC compatible.
page 119
We recommend that you use the AC Power adapter as the power source for the DVD Camcorder.
Connecting to a TV which has Audio/Video Input Jacks
1. Connect the DVD Camcorder to your TV with the Multi-AV cable.
The yellow jack: Video
The white jack: Audio(L)-mono
The red jack: Audio(R)
If you connect to a monaural TV, connect the
yellow jack (Video) to the video input of the TV
and the white jack (Audio L) to the audio input of
the TV.
2. Set the [Mode] switch to [DISC].
3. Set the
[Power] switch to [ (Player)].
4. Turn on the TV and set the TV/VIDEO selector on
the TV to Video.
Refer to the TV user’s manual.
5. Play the disc.
page 63
Notes
You may use an S-Video connector on the cable to obtain better quality pictures if you have a S-Video connector on your
TV.
Even if you use an S-Video connector, you need to connect an audio cable.
If you connect the cable to the AV/S jack, you will hear sound from the DVD Camcorder’s speakers.
If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
TV
Signal flow
Multi-AV Cable
DVD Camcorder