Samsung SC-DC164 Camcorder User Manual


 
ENGLISH
23
Preparation
Battery Level Display
The battery level display indicates the amount of power remaining in the Battery Pack.
a. Fully charged
b. 20~40% used
c. 40~80% used
d. 80~95% used
e. Completely used (Blinking)
(The DVD Camcorder will turn off soon, change the battery as soon as possible.)
The Finalize/Format functions are not available at battery level ‘d’ and ‘e’
At battery level ‘d’
Each time you select Finalize/Format from menu, the message of <Please connect AC adapter> will be displayed for 5
seconds.
At battery level ‘e’
The battery becomes low in capacity and the < > indicator blinks on the display.
The screen will turn blue when the battery is almost completely discharged.
Battery Pack Management
The Battery Pack should be recharged in an environment between 32 °F (0 °C) and 104 °F (40 °C).
The Battery Pack should never be charged in a room with a temperature that is below 32 °F (0 °C).
The life and capacity of the Battery Pack will be reduced if it is used in temperatures below 32 °F (0 °C) or left in
temperatures above 104 °F (40 °C) for a long period of time, even when it is fully recharged.
Do not put the Battery Pack near any heat source (i.e. fire or a heater).
Do not disassemble, apply pressure to, or heat the Battery Pack.
Do not allow the + and – terminals of the Battery Pack to be short-circuited. It may cause leakage, heat generation, induce
overheating or fire.