Filter
Top Products
ENGLISH
90
DVD Camcorder: Connection
Connecting to a TV which has no Audio/Video Input Jacks
You can connect your DVD Camcorder to a TV through a VCR.
1. Connect the DVD Camcorder to your VCR with the Multi-AV cable.
The yellow jack: Video
The white jack: Audio(L) - Mono
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the
[Mode] switch to [DISC].
4. Set the
[Power] switch to [ (Player)].
5. Turn on both the TV and VCR.
Set the input selector on the VCR to Line.
Select the channel reserved for your VCR on the TV
set.
6. Play the disc.
page 63
Notes
If the VCR has an S-Video input terminal, you may use S-Video for better quality.
Even if you use an S-Video connector, you need to connect an audio cable.
If only a mono audio input is available on the VCR set, use the audio cable with the white jack (Audio L).
TV
Signal flow
Multi-AV Cable
DVD Camcorder
VCR
Antenna