Filter
Top Products
English _49
● SETUP SCREEN
BLC Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
Select <Backlight>.
Set <Mode> to <BLC>.
Set <BLC level>.
You can change the level to adjust the
brightness of the monitoring area.
Set the <Top, Bottom, Left, Right>
levels to specify the target area.
HLC (Highlight Compensation) Setup
When a strong light such as streetlamp or headlight faces forward to the camera, you can
mask that exposed area in order to protect it from being saturated.
Select <Backlight>.
Set <Mode> to <HLC>.
Set the <HLC level> and the <Mask
tone>.
HLC level : Adjust the brightness
level so as to remove the incoming
highlight from a specific condition.
Mask tone : Adjust the mask tone of
the highlighted area.
At night operation, this function will be activated only if the incoming highlight exceeds a certain
area in a low contrast environment.
At night, HLC will not function if the scene is either too bright or too dark.
1.
2.
3.
4.
1.
2.
3.
•
•
M