Filter
Top Products
setup screen
52_ setup screen
OSD Setup
Select <OSD>.
Select each item and set it properly.
Camera title : Use alphanumeric
characters in the list and enter a
desired title in the bottom input line.
You can enter up to 15 characters for the
title.
Camera title position x, y : Specify the coordinates where the camera title is
displayed.
Time OSD Setup
Select <Time OSD>.
Select each item and set it properly.
Time display : Specify the use of time
display.
Date format : Specify the date format
that will be displayed on the screen.
Time position display X, Y : Specify the position of time.
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
From the Setup menu, select the
<Audio & Video (
)> tab.
Click <Smart codec setup>.
Select ROI Area.
Face Detection : Active if a face is
recognized on the monitoring screen.
Face detection is enabled only if the
following conditions are met:
The face is positioned at ±45
degrees to the left or right from the top.
The effective range of the face rotation is ±30 degrees vertically, and ±60 degrees
horizontally.
The minimum size of the face is 20x20 based on the resolution of 320x240.
Manual : Specify the ROI area to monitor manually.
1.
2.
•
•
1.
2.
•
•
•
1.
2.
3.
•
M
-
-
-
•