Filter
Top Products
setup screen
60_ setup screen
Installing the certificate
Enter the certificate name.
Select the certificate file to be installed and certificate key, and click [Install (
)]
button.
Deleting the certificate
Click [Delete ( )] button.
802.1x
When connecting network, you can choose whether using 802.1x protocol, and then install
the certification.
From the Setup menu, select the
<Network (
)> tab.
Click <802.1x>.
Set the <IEEE 802.1x Setting(EAPOL
using EAP-TLS)>.
Enable IEEE 802.1x : Specify the use
of the 802.1x protocol.
EAPOL Version : Select version 1 or 2.
EAPOL ID : Enter the EAPOL ID.
EAPOL Password : Enter the EAPOL password.
If the connected network device does not support the 802.1x protocol, the protocol will not
operate properly even if you set it.
To install/remove 802.1x related certificates
Press the [Browse ( )] button for each item and select a certificate to install.
If no certificate is installed, you will see “Not Available” appearing next to the
selected item.
Press the [Install (
)] button to start installation with a message of “Installed”
next to the item.
Press the [Delete ( )] button to remove the certificate.
1.
2.
1.
1.
2.
3.
•
•
•
•
J
1.
2.
3.
4.