Filter
Top Products
setup screen
50_ setup screen
WDR Setup
It displays a sharp image of the objects in a scene where both bright and dark areas exist.
Select <Backlight>.
Set <Mode> to <WDR>.
Specify the <WDR level>.
WDR is available only if <Megapixel
Mode> is set to <2-Megapixel>.
If WDR mode is activated, you cannot
change the shutter type.
Exposure Setup
You can adjust the exposure level of the camera.
Select <Exposure>.
Select each item and set it properly.
Brightness : Adjust the screen
brightness.
Shutter mode : Adjust the electronic
shutter of the camera.
ESC (Electronic shutter control) :
Adjust the shutter speed
automatically according to the
ambient brightness.
This will be activated if <Lens> is set to
<Manual>.
Manual : Adjust the shutter speed of the camera manually.
A.FLK (Anti flicker) : This will prevent the screen from flickering.
Shutter speed : Control the shutter speed manually.
SSNR3 : Specify the use of noise reduction.
SSNR3 level : Adjust the noise reduction level.
Sens-up mode : Automatically senses the darkness level at night or in a low
contrast scene and extends the accumulation time accordingly for a bright and
sharp image.
If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated.
The greater the video accumulation factor is, the brighter the screen is but the afterimage of a
moving object grows accordingly.
1.
2.
3.
M
1.
2.
•
•
-
-
-
•
•
•
•