Filter
Top Products
Camera Settings (CAMERA)
12
Sets the white balance according to the shooting conditions.
The following methods are available for setting white balance.
• Auto trace white balance (ATW) <Initial setting>
• One-push automatic white balance (AWC)
• Fixed white balance (3200/5600/FLUO)
• Manual white balance (MWB)
b Auto trace white balance (ATW)
Even when light sources of the target object change, automatic
adjustment assures capture of most suitable colors.
Use the joystick lever (xy) to select [WHITE BALANCE] and use the
lever (vw) to select “ATW y”.
Auto trace white balance settings are completed when “ATW y” is
selected. When an extremely bright light source is in the target
object, use the mask pattern so that the light source will not be
detected.
To place a mask pattern over specific light sources in the target
object, do the following.
1
While “ATW y” is selected by using the joystick
lever (vw), press the [ENTER] button.
The ATW SETTING screen appears.
2
Use the joystick lever (xy) to select [MASKING],
use the lever (vw) to select “ON y”, and press the
[ENTER] button.
The ATW MASKING screen appears. A mask pattern is
displayed in the top left of the screen.
3
Use the joystick lever (xy or vw) to move a mask
pattern to the light source area to be masked, and
press the [ENTER] button.
This sets the mask pattern.
If you want additional mask patterns to be placed, repeat the
above procedure.
<To delete the mask pattern>
Use the joystick lever (xy or vw) to place a mask pattern over
the mask pattern to be cancelled, then press the [ENTER]
button.
4
Use the joystick lever (y) to move a mask pattern to
the bottom area of the screen and continue holding
the lever straight down for three seconds.
This completes the mask pattern setting procedure.
☞ After completing setting, use the lever to move the cursor to
[MENU] and select “BACK” or “END”.
C Setting the white balance (WHITE BALANCE)
Placing mask patterns
Mask patterns can be placed only when registering a
view setting file in the CAMERA VIEW screen.
y
y
y
y
y
SYNC
IRIS
WHITE BALANCE
BLC
SHUTTER
APERTURE
AGC
GAMMA
DAY/NIGHT
PRESET
MENU
INT
AUTO
ATW
OFF
OFF
ON
ON
0.45
AUTO
OFF
BACK
ATW SETTING
MASKING y
ON
ATW MASKING
CONTINUE (y)
ATW MASKING
CONTINUE (y)