Filter
Top Products
Network Camera (Wired LAN) Settings
2
Menu select buttons
The live image display area and setting area
changes when you click on one of these buttons.
•
[LIVE VIEW] button (p. 52)
Live images can be monitored.
•
[FULL SCREEN] button (p. 52)
Sets the live image display area to a fixed
image size (720x480).
•
[NETWORK] button (p. 20)
Used when making network settings.
•
[WIRELESS LAN] button (p. 60)
Used when making wireless LAN settings.
•
[PPP] button (p. 62)
Used when setting up an Internet connection
using a modem.
•
[CAMERA] button (p. 28)
Used when making settings for the camera
such as camera title, image quality and
day/night mode.
•
[ALARM] button (p. 36)
Used when making general alarm settings
such as alarm recording settings and alarm
image transmission settings.
•
[CLOCK] button (p. 25)
Used when setting the camera’s clock.
•
[RS-232C] button (p. 67)
Used when setting the communication speed
when the camera is connected directly to the
computer.
•
[LANGUAGE] button (p. 67)
Click this button if you would like to change
the language. The language selection screen
will be displayed.
•
[STATUS] button (p. 68)
Used when checking firmware versions and
information relating to the camera.
3
Network disconnect button
Click this button to shut down operation of the
network camera. The following message will be
displayed when this button is clicked. To
reconnect the camera, click the (Refresh)
button in the title bar.
Note: If you have closed the browser without
using the network disconnect button
because of a problem such as a browser
error, wait for 90 seconds or more to pass
before accessing the camera again.
4
[Get JPEG2000 PLUG-IN] button
If you need to install the JPEG2000 plug-in
software, click this button to point the browser to
a website page for downloading the software.
Select “JPEG2000 Plug-in Software” and then
start the download. You will need an Internet
connection in order to download the software.
5
Live image display area
Live images are displayed here when you click
the [LIVE VIEW] or [FULL SCREEN] button.
6
[SET] button
Click this button to accept the settings that have
been made using the drop-down list boxes.
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
English
– 17 –