Network Camera (Wired LAN) Settings
Access Level Settings (Table 1)
When operating the network camera, you need to select an access level to either limit operations to
only the monitoring of live images or to allow menu settings to be changed as well.
Username/password Access level
•
For Administrator access
level
All operations and settings can be carried out.
Username: ID3
Password: 3333
•
For Operator access level Only the following buttons can be operated.
Username: ID2
Password: 2222
•
For User access level Only the following buttons can be operated.
Username: ID1
Password: 1111
The transmission setting menu (A) in the live image screen
is disabled.
In order to make it easier to refer to this Instruction Manual when carrying out the various camera
operations, the usernames (_ID1_, _ID2_ and/or _ID3_) are indicated in the top-right corner of the page.
(A)
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
English
– 21 –