Filter
Top Products
Setting procedure
1 Select the S icon and press the
SET button.
œ The S icon moves to the left end
of the line.
2 Fill the entire screen with a plain
white card (or piece of paper, etc.),
and perform step 3.
3
Press the SET button.
œ This completes the white balance
setting.
œ Once the white balance setting is
programmed for the S icon, it is
retained even if another white
balance setting (H, g, h,
e, or i) is selected. If you
changed to another setting,
whenever you select the S icon
and press the SET button, the
previously programmed setting is
recalled.
HINT
To cancel the white balance setting
œ Perform step 2, select H, and then press the SET button.
NOTE
To capture sepia-tone images
œ In step 2 of step 2, instead of using a white card, use a blue card to set
the white balance. You can experiment and get different results by
changing the card color to program the white balance.
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
English
108