Sanyo VPC-MZ3 Digital Camera User Manual


 
6
Select the < mark, and press the SET button.
œ This completes the color adjustment setting.
œ You are returned to the Shooting Option Setting Screen.
œ You can display and confirm the color adjustment setting on the
shooting status display (see page 51) and Shooting Information
Screen (see page 127).
NOTE
About the hue setting
œ The hue setting is shown for each separate colorred, yellow, green, blue,
etc. The hue can be set within a maximum range of +50 to 50. But the
actual range that can be set is limited depending on the other hue settings
of a corrected color.
Example: If the Í hue is set to +20, the side range for the í hue
setting goes up to only –30.
About the saturation setting
œ The saturation setting specifies the degree of color brilliance. When the
saturation setting is set to the + side, the colors are more vivid; on the
side they are more smoky. When set to 50, the color has no saturation
and it becomes monochrome.
About the brightness setting
œ The brightness setting specifies the degree of lightness or darkness. When
the brightness setting is set to the + side, the image is lighter; on the – side
it is darker.
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
English
116