Sanyo VPC-MZ3 Digital Camera User Manual


 
<Manual exposure control Í>
œ The display to set the aperture size
and shutter speed appears.
œ Press [d] or [c] on the arrow button
to select aperture size \ or
shutter speed ä, and press [j] or
[l] on the arrow button to change
the setting.
Setting range:
Aperture \: 4.9 to 11.8 (Tele)
2.7 to 6.7 (Wide)
Shutter speed ä: 16 sec. to
1/2500 sec.
4
Press the SET button.
œ This completes the exposure control setting.
œ You are returned to the Shooting Setting Screen.
HINT
œ When using a slow shutter setting, use a tripod or the like to stabilize the
digital camera.
œ When manual exposure control is selected, the exposure correction value
becomes ±0 and exposure correction cannot be performed.
œ If the aperture value is set to F10 or higher, the resolution of the shot
picture may be slightly reduced.
CAUTION
œ While the Exposure Control Setting Screen is displayed (step 3), the zoom
function is disabled.
M
MANUAL 13
j
p
4.7 1/30
l SELECT
SETTING
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
English
112