Filter
Top Products
Putting the devices into operation
15
Changing the color-coded protection ring
The color-coded protection ring º prevents the multi-function switch ¸ from accidental
operation. Protection rings in different colors are available as accessories. The protection
rings allow you to clearly identify each radio microphone.
̈ Remove the color-coded protection ring as shown in the left-hand diagram.
̈ Put on a new protection ring as shown in the right-hand diagram.
SKP 100 G3 plug-on transmitter
Inserting the batteries/accupack
For powering the plug-on transmitter, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
̈ Slide the battery compartment cover ¸ in the direction of the embossed arrow and open
the cover.
̈ Insert the two batteries or the accupack as shown below. Please observe correct polarity
when inserting the batteries/accupack.
̈ Close the battery compartment.
The battery compartment cover ¸ locks into place with an audible click.
Charging the accupack
̈ Remove the BA 2015 accupack (optional accessory).
̈ Insert the BA 2015 accupack into the L 2015 charger (accupack and charger are optional
accessories):
º º
ᕨ ᕨ
¸
¸
The L 2015 charger can only charge the BA 2015 accupack. Standard batteries
(primary cells) or individual rechargeable battery cells cannot be charged.
ew 100 P G3 Set _529660_0309_Sp9.book Seite 15 Mittwoch, 8. April 2009 6:57 18