Filter
Top Products
Using the devices
21
How you are using the devices determines how long the lock mode remains deactivated:
The lock mode icon flashes prior to the lock mode being activated again.
Muting the audio signal or deactivating the RF signal
SK 100 G3/SKP 100 G3
The MUTE switch · (SK)/ ¾ (SKP) allows you to mute the audio signal or to deactivate the
RF signal. Via the “Mute Mode” menu item, you can set the desired function of the MUTE
switch · (SK)/ ¾ (SKP):
̈ From the “Mute Mode” menu item, select the desired setting (see page 25).
̈ Exit the operating menu.
̈ Slide the MUTE switch · (SK)/ ¾ (SKP) to the left, to the position MUTE.
The transmitter reacts as indicated in the table.
You can deactivate the RF signal of the transmitters (SKM 100 G3, SK 100 G3,
SKP 100 G3) on switch-on. For more information, refer to the chapter “Switching the
devices on/off” on page 17.
Using the ON/OFF button, you can also activate/deactivate the transmitters’ RF
signal during operation. To do so, briefly press the ON/OFF button and proceed as
described on page 19.
Setting Slide the MUTE switch · / ¾ ... Function
“AF On/Off” ... to the left (position MUTE) Mutes the audio signal
... to the right Unmutes the audio signal
“RF On/Off” ... to the left (position MUTE) Deactivates the RF signal
(offline operation)
... to the right Activates the RF signal
(online operation)
“Disabled” No function
When you are in the operating menu
The lock mode remains deactivated until you exit the operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
·
MHz
533.875
ew100 G3
MUTE
P
AF
ብ
ቨ
¾
ew 100 P G3 Set _529660_0309_Sp9.book Seite 21 Mittwoch, 8. April 2009 6:57 18