Filter
Top Products
Synchronizing transmitters with diversity receivers
27
Using freely selectable frequencies
You can also freely select the receiving frequencies and store these frequencies in the
frequency banks “U”.
̈ Set each diversity receiver to the frequency bank “U”.
̈ On one of the receivers, select a channel within this frequency bank and assign this
channel one of the calculated receiving frequencies (“Tune”, see page 24).
̈ Synchronize a transmitter with this receiver (see page 19).
OR:
̈ Manually set the transmitter to the same frequency bank and channel that you set on the
receiver.
̈ Repeat for the remaining transmitters and receivers as described above.
It might be that the freely selected frequencies are not intermodulation-free
If you use frequencies from the frequency bank “U”, it might be that the frequen-
cies are not intermodulation-free.
̈ Contact your Sennheiser partner who will be pleased to calculate intermodula-
tion-free frequencies for you (see www.sennheiser.com).
ew 100 P G3 Set _529660_0309_Sp9.book Seite 27 Mittwoch, 8. April 2009 6:57 18