Filter
Top Products
Synchronizing transmitters with diversity receivers
26
Synchronizing transmitters with diversity receivers
When synchronizing transmitters with diversity receivers, please observe the following:
Upon delivery, transmitter and diversity receiver are synchronized with each other. If,
however, you cannot establish a transmission link between transmitter and diversity
receiver, you have to synchronize the channels of the devices:
̈ Deactivate the RF signal on all transmitters (see page 21).
This prevents that, during the frequency scan, the channels used by switched-on trans-
mitters are displayed as “used”.
̈ With a diversity receiver, perform a frequency preset scan to scan the frequency banks
for unused channels (“Scan New List”, see page 24).
̈ Select a frequency bank and a channel on this diversity receiver (“Current List”, see
page 24).
If you want to set up a multi-channel system, select a frequency bank with a sufficient
number of unused channels for all planned transmission links.
̈ Synchronize a transmitter with the diversity receiver (see page19).
The receiver’s frequency, name and pilot tone setting are transferred to the transmitter.
OR:
̈ Manually set the transmitter to the same frequency bank and channel that you set on the
receiver.
̈ Activate the RF signal on the transmitter.
The transmission link is established.
If you want to set up a multi-channel system:
̈ Repeat the following 4 steps for each additional transmission link:
– Perform a frequency preset scan with the next diversity receiver.
– Select a channel from the same frequency bank as with the first diversity receiver.
– Synchronize a transmitter with the diversity receiver.
– Activate the RF signal on the transmitter.
̈ Make sure that the desired frequencies are listed in the enclosed frequency
information sheet.
OR:
̈ Contact your Sennheiser partner who will be pleased to calculate intermodula-
tion-free frequencies for you.
̈ Make sure that the desired frequencies are approved and legal in your country
and, if necessary, apply for an operating license.
ew 100 P G3 Set _529660_0309_Sp9.book Seite 26 Mittwoch, 8. April 2009 6:57 18