Filter
Top Products
Using the devices
20
To transfer the parameters:
̈ Switch the transmitter and the diversity receiver on.
̈ On the receiver, call up the “Sync” menu item.
“Sync” appears on the display panel of the diversity receiver.
̈ Place the infra-red interface of the transmitter (see page 5 to page 7) in front of the
infra-red interface of the diversity receiver ¸.
The parameters are transferred to the transmitter. When the transfer is completed, “ ”
appears on the display panel of the diversity receiver. The receiver then switches back to the
current standard display.
To cancel the transfer:
Press the ON/OFF button ¹ on the diversity receiver.
“ ” appears on the display panel of the receiver. “ ” also appears if no suitable trans-
mitter was found (wrong frequency range/wrong generation).
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item (see
page 23). If the lock mode is activated, you have to temporarily deactivate it In order to be
able to operate the devices:
¸
EK 100 G3/SK 100 G3 SKM 100 G3 SKP 100 G3
̈ Press the SET
button ² (EK) or ¶
(SK).
̈ Press the multi-
function switch ¸.
̈ Press the SET
button µ.
“Locked” appears on the display panel.
̈ Press the rocker
button ¶ (EK) or º
(SK).
̈ Move the multi-
function switch ¸
upwards/downwards.
̈ Press the
UP button ´/
DOWN button².
“Unlock?” appears on the display panel.
̈ Press the SET
button ² (EK) or ¶
(SK).
̈ Press the multi-
function switch ¸.
̈ Press the SET
button µ.
The lock mode is temporarily deactivated.
P
¸
²
¶
¶
º
²
µ
´
ew 100 P G3 Set _529660_0309_Sp9.book Seite 20 Mittwoch, 8. April 2009 6:57 18