Filter
Top Products
Using the devices
18
SK 100 G3 bodypack transmitter, SKM 100 G3 radio microphone and
SKP 100 G3 plug-on transmitter
To switch your transmitter on (online operation):
SK 100 G3 SKM 100 G3 SKP 100 G3
̈ Push the two catches ¸
and open the battery
compartment cover µ.
̈ Briefly press the ON/OFF
button Ƹ. The bodypack
transmitter transmits an
RF signal.
The red ON LED ¿ lights
up and the standard
display “Frequency/
Name” appears on the
display panel. The trans-
mission icon ብ is
displayed.
̈ Briefly press the ON/OFF
button ¹.
The radio microphone
transmits an RF signal.
The red ON LED ¾ lights
up and the standard
display “Frequency/
Name” appears on the
display panel. The trans-
mission icon ብ is
displayed.
̈ Briefly press the ON/OFF
button º.
The plug-on transmitter
transmits an RF signal.
The red ONLED ¶ lights
up and the standard
display “Frequency/
Name” appears on the
display panel. The trans-
mission icon ብ is
displayed.
To switch your transmitter off:
̈ If necessary, deactivate the lock mode (see page 20).
̈ Press the ON/OFF
button Ƹ until “OFF”
appears on the display
panel.
The display panel turns
off. The red ON LED ¿
goes off.
̈ Press the ON/OFF
button ¹ until “OFF”
appears on the display
panel.
The display panel turns
off. The red ON LED ¾
goes off.
̈ Press the ON/OFF
button º until “OFF”
appears on the display
panel.
The display panel turns
off. The red ON LED ¶
goes off.
P
¶
ብ
º
Ƹ
¿
¶
¸
¸
ብ
¾
¸
µ
¹
µ
ብ
You can switch your transmitter on and deactivate the RF signal on switch-on.
Formore information, refer to page 19.
When in the operating menu, pressing the ON/OFF button will cancel your entry
(ESC function) and return you to the current standard display.
ew 100 P G3 Set _529660_0309_Sp9.book Seite 18 Mittwoch, 8. April 2009 6:57 18