Filter
Top Products
LOADING THE BATTERIES
The SD9 uses two sets of batteries. Make sure that both sets of batteries are in
place before using the camera.
LOADING THE LITHIUM BATTERIES
Two CR123A or two DL123A ; for mechanical operation of the camera
1
Be sure that the “D”-dial is set to the OFF position. Then use a coin or similar
object to turn the battery cover lock to the OPEN position.
2
Insert the lithium batteries into the chamber according to the + and – marks as
indicated.
3
Close the battery cover and turn the battery-cover lock to the CLOSE position.
INSERTING AND REMOVING THE 4 AA OR 2 LITHIUM CR-V3 BATTERIES
Two Lithium CR-V3 Battery or 4pcs”AA” type battery for the operation of
camera by color LCD monitor
TO INSERT THE BATTERIES
1
Be sure to set the “D” –Dial to the OFF
position. Turn the battery latch in the direction
of the arrow to unlock and then pull out the
battery case.
19