Filter
Top Products
MOUNTING AND REMOVING THE LENS
The SD9 camera use SA type inside and outside bayonet mount (SA-IB and
SA-OB) respectively.
1
Make sure to turn the “D”-Dial to OFF position
(Power Off position)
2
Remove the Camera’s body cap and the lens’
rear cap.
3
Align the red mark on the Camera’s mount with
red dot on the lens. Insert the lens into the
mount of the camera, and rotate the lens
clockwise until it clicks into the locked position.
CAUTION !!
· To ensure proper connection, please do not press the lens lock button while
mounting the lens.
· The SD9 camera contains an Dust Protector, located just behind the camera
mount. Dust Protector is a very delicate device, be careful not to cause any
scratch on its surface. Touching or pushing it with your fingers can easily
damage it. If there is dirt and dust on it, please refer to Maintenance part of your
manual (P.101).
23