Filter
Top Products
22
CCD-TR2300/TR3300 3-856-204-23 (1)
Using alternative power sources
Advanced operations
12
DC OUT
Accessory to be used
Supplied AC power adaptor
Edit Station HSA-EC1 (supplied for CCD-
TR3300 for Canadian model only)*
Battery pack NP-F530 (supplied), NP-F730
Battery case (supplied)
Car battery charger DC-V515
Power source
House current
Battery pack
Size AA (LR6) Sony
Alkaline battery
12 V or 24 V car battery
You can choose any of the following power sources for your camcorder: battery pack,
house current, alkaline battery and 12/24 V car battery. Choose the appropriate power
source depending on where you want to use your camcorder.
Place
Indoors
Outdoors
In the car (CCD-TR3300 for
Canadian model only)
* Edit Station HSA-EC1 cannot be used for camera recording.
Note on power sources
Disconnecting the power source or removing the battery pack during recording or
playback may damage the inserted tape. If this happens, restore the power supply again
immediately.
Using the house current
To use the supplied AC power adaptor:
CCD-TR3300 for Canadian model only:
(1) Connect the AC power cord to a wall outlet, then connect the connecting cord
to the DC OUT jack on the AC power adaptor.
(2) Insert the connecting plate into the guides at the bottom of the camcorder.