Sony CCD-TR2300 Camcorder User Manual


 
95
Additional information
CCD-TR2300/TR3300 3-856-204-23 (1)
Note on battery life
The batteries for the Remote Commander last about 6 months under normal operation.
When the batteries become weak or dead, the Remote Commander does not work.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.
To use the Remote Commander
Make sure that the COMMANDER is set to ON in the menu system on the camcorder.
When using the Handycam Station, set COMMAND MODE to VTR 2 and aim the
Remote Commander at the remote sensor on the Edit Station.
Remote control direction
Notes on the remote commander
Keep the remote sensor away from strong light sources such as direct sunlight or
illumination. Otherwise, the remote control may not be effective.
Be sure that there is no obstacle between the remote sensor on the camcorder and the
Remote Commander.
This camcorder works in commander mode VTR 2. The commander modes (1, 2 and
3) are used to distinguish this camcorder from other Sony VCRs to avoid remote
control misoperation. If you use another Sony VCR in commander mode VTR 2, we
recommend you change the commander mode or cover the remote sensor of the VCR
with black paper.
15°
15°
30°
25°
5m
ON
MENU
[MENU] : END
COMMANDER
OFF
1
2
3
MENU
ON
MENU
WIND
COMMANDER
Hi8
COUNTER
ORC TO SET
REC MODE
TITLE COL
[MENU] : END