Filter
Top Products
32
CCD-TR2300/TR3300 3-856-204-23 (1)
When you switch from one scene to another, you can wipe away the still picture. With
this function, the first still picture is wiped away from the center to reveal the moving
picture underneath.
You can hear the sound of the second scene as you start recording the second scene.
(1) While the camcorder is in Standby mode, press FADER/OVERLAP repeatedly
so that the WIPE indicator appears in the viewfinder.
(2) Press START/STOP to record the next scene. The WIPE indicator disappears
after wiping away.
Notes on wipe
• You cannot use the following functions while using the wipe function. Also, while
using the following functions, you cannot use the wipe function.
– Digital effect
– Slow shutter
– Title
• You can select wipe during recording.
• When you select the wipe function after using the following operations , the
camcorder memorizes the image on the tape. As the image is being memorized, the
WIPE indicator flashes quickly, and the picture you are shooting disappears from the
viewfinder. You may not record a clear picture depending on the condition of the
tape.
– Turn STANDBY down
– Set the POWER switch to OFF
– Eject a tape
– Edit search
– Fading out
– Digital effect
– Slow shutter
– Title
Wiping away a still picture
(CCD-TR3300 only)
WIPE WIPE
1
M.FADER
OVERLAP
WIPE
FADER
2
L
S
T
A
N
D
B
Y
O
C
K
FADER/OVERLAP