Filter
Top Products
87
Additional information
CCD-TR2300/TR3300 3-856-204-23 (1)
Cause and/or Corrective Action
• The viewfinder lens is not adjusted.
m Adjust the viewfinder lens. (p.11)
• The contrast between the subject and background is too high.
The camcorder is not malfunctioning.
m Change locations.
• The camcorder is not malfunctioning.
• DISPLAY on the Remote Commander has not been pressed.
m Press DISPLAY on the Remote Commander. (p.19)
• EDIT is set to ON in the menu system.
m Set it to OFF. (p.27)
• The video heads may be dirty.
m Clean the heads using the Sony V8-25CLH cleaning cassette
(not supplied). (p.82)
•AE SHIFT is set in the menu system.
m Set it to the center position. (p.61)
•VF BRIGHT is set in the menu system.
m Set it to the center position. (p.26)
• AUTO LOCK/HOLD is set to the center position and a white
balance indicator appears in the viewfinder.
m Set it to AUTO LOCK. (p.63)
• Shooting conditions were not suitable for automatic white
balance operation.
m Adjust the white balance manually. (p.63)
• Slow shutter function works.
m The camcorder is not malfunctioning.
• The camcorder is not malfunctioning.
• The camcorder is operating in Demo mode.
m Exit Demo mode. (p.93)
Picture
Symptom
The image on the viewfinder screen
is not clear.
A vertical band appears when a
subject such as lights or a candle
flame is shot against a dark
background.
A vertical band appears when
shooting a very bright subject.
The menu is not displayed on the TV.
The playback picture is not clear.
The picture is “noisy”.
The picture is too bright or too dark.
The colors of the playback picture is
strange.
White dots appear in the viewfinder.
A vertical band appears when
shooting a very bright subject.
An unknown picture is displayed.
Others
Symptom
The supplied Remote Commander
does not work.
The CHARGE lamp flashes after you
charge the battery pack installed in
the camcorder. (CCD-TR3300 for
Canadian model only)
(to be continued)
Cause and/or Corrective Action
• COMMANDER is set to OFF in the menu system.
m Set it to ON. (p.25)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The batteries are not inserted with the correct polarity.
m Insert the batteries with the correct polarity. (p.94)
• The batteries are dead.
m Insert new ones. (p.94)
• The camcorder is not malfunctioning.