Filter
Top Products
74
CCD-TR2300/TR3300 3-856-204-23 (1)
You can record a tape from another VCR or TV program from a TV that has audio/
video outputs. Connect the camcorder to the VCR or TV.
(1) While pressing the small green button on the POWER switch, set it to VTR.
(2) Press r REC and the button on far right together at the point where you want
to start recording.
In recording and recording pause mode, S VIDEO and VIDEO/AUDIO jacks
automatically work as input jacks.
Recording from a VCR or TV
If your VCR or TV is a monaural type, connect only the white plug for audio on both
the camcorder and the VCR or TV.
If you are going to connect the camcorder using the S video cable (not supplied) [a], you
do not need to connect the yellow (video) plug of the A/V connecting cable [b].
Do not connect the S video cable to the camcorder if your VCR or TV doesn’t have any S
video jack.
To check the picture from a VCR or TV before recording
Press P after pressing r REC. You can check the picture in the viewfinder.
To stop recording
Press π.
: Signal flow
TV
VCR
S-VIDEO OUT
VIDEO OUT
AUDIO OUT
S
-
V
I
D
E
O
[a]
V
I
D
E
O
[b]
AUDIO
1
OFF
POWER
CAMERA
VTR
2
REC
(not supplied)