Filter
Top Products
72
CCD-TR2300/TR3300 3-856-204-23 (1)
Note on --:--:--:-- indicator
The --:--:--:-- indicator appears during playback if:
• nothing is recorded.
• the RC time code is unreadable because of the damage of the tape or because of the
noise.
• you recorded using another VCR without RC time code function.
• you erase the index signal or make PCM after recording on another VCR in the
portion on which the RC time code is written.
In this case, we recommend you to rewrite the RC time code.
You can create your own video program by editing with any other h 8 mm, H Hi8,
j VHS, k S-VHS, VHSC,
K
S-VHSC, l Betamax or ¬ ED Betamax
VCR that has video/audio inputs.
Before editing
Connect the camcorder to the VCR as described in “Connections for playback” on page
16.
Set the input selector on the VCR to LINE, if available.
(1) While pressing the small green button on the POWER switch, set it to VTR.
(2) Set EDIT to ON in the menu system.
Editing onto another tape
Writing the RC Time code on a recorded tape
1
123
MENU
EDIT OFF
2
ON
OFF
POWER
CAMERA
VTR
MENU
[MENU] : END
: Signal flow