Filter
Top Products
61
Advanced Operations
CCD-TR2300/TR3300 3-856-204-23 (1)
When you shoot in a snowfield or on a beach in the mid-summer and the subject may
become dark because of the extreme brightness, you can change the brightness of the
picture in the menu system. You can also use this function when the subject is too bright
— subjects on stages, night views, etc.
(1) While the camcorder is in Standby mode, press MENU to display the menu in
the viewfinder.
(2) Turn the control dial to select AE SHIFT, then press the control dial.
(3) Turn the control dial to adjust the brightness of the picture. The picture
becomes brighter when you turn the control dial up, and darker when you
turn the control dial down. (Three levels for each direction.)
(4) Press MENU. The menu display disappears and the AE shift indicator appears
in the viewfinder.
To cancel the AE shift
Set AE SHIFT to the center position in the menu system.
When adjusting the brightness
We recommend you to connect the camcorder to a TV so that you can monitor the
brightness on the TV.
Note on the AE shift
You cannot change AE shift while adjusting the aperture manually.
Adjusting the brightness of the picture
1
2
4
3
AS +3
MENU
[MENU] : END
AE SHIFT
MENU
MENU
OFF
MENU
WIND
COMMANDER
Hi8
COUNTER
ORC TO SET
REC MODE
TITLE COL
[MENU] : END
MENU
TITLE POS
TITLE LANG
TITLE1 SET
TITLE2 SET
D ZOOM
AE SHIFT
BEEP
[MENU] : END