Filter
Top Products
52
CCD-TR401E/TR402E 3-858-958-11(1).E,R
Trouble Check
Symptom Cause and/or Corrective Actions
• You pressed DATE(+) and TIME(NEXT) together for more
than 2 seconds.
m The camcorder is not malfunctioning.
You may start recording. Flashing will stop soon.
m Reset the date and time. (p. 38)
• START/STOP MODE is set to or 5 SEC.
m Set it to . (p. 31)
Picture
Symptom Cause and/or Corrective Actions
• The viewfinder lens is not adjusted.
m Adjust the viewfinder lens. (p. 13)
• The contrast between the subject and background is too high.
m The camcorder is not malfunctioning. Change locations.
• The video heads may be dirty.
m Clean the heads using the Sony V8-25CLH cleaning
cassette. (p. 46)
Others
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF.
m Set it to ON. (p. 34)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The battery is not inserted with the correct polarity.
m Insert the battery with the correct polarity. (p. 63)
• The batteries are dead.
m Insert new ones. (p. 63)
m Detach the eyecup and clean the viewfinder lens. (p. 47)
The image on the viewfinder
screen is not clear.
A vertical band appears when a
subject such as lights or a
candle flame is shot against a
dark background.
The picture is “noisy”.
Recording stops in a few
seconds.
The date or time indicator
disappears.
The supplied Remote
Commander does not work.
There is dust in the viewfinder.
The date or time
indicator is flashing.