Filter
Top Products
104
To return to FN
Press EXIT.
To execute settings
Press EXEC or OK.
To cancel settings
Press OFF or AUTO. The display returns to PAGE1, 2 or 3.
Notes
•When using the touch panel, press the LCD screen lightly with your finger or the
supplied stylus (DCR-IP220 only).
•Do not press the LCD screen with sharp objects other than the stylus supplied (DCR-
IP220 only).
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can control the display with DISPLAY/TOUCH PANEL on your camcorder.
•When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 204).
•When the LCD screen gets dirty, use the supplied cleaning cloth.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to gray.
Press FN to display the following buttons:
In the memory camera mode
PAGE1 SPOT FOCUS, MENU, PLAY, INDEX, SPOT METER, EXPOSURE
PAGE2 SELFTIMER, PLAY, INDEX, MEM MIX
PAGE3 LCD BRT, PLAY, INDEX, VOL
In the memory playback mode
PAGE1 MENU, CAM, INDEX, DELETE,
+
,
–
PAGE2 PB ZOOM, CAM, INDEX, DATA CODE,
+
,
–
PAGE3 LCD BRT, CAM, INDEX, VOL,
+
,
–
Using a “Memory Stick” – Introduction