Filter
Top Products
Quick Start Guide
13
Recording a still image on a “Memory Stick”
(p. 111)
When you purchase your camcorder,
the clock setting is not set up yet. If
you want to record the date and time
for a picture, set the clock setting
before recording (p. 22).
Viewfinder
When the LCD panel is closed
with the LCD screen facing
inwards, use the viewfinder.
Adjust the viewfinder lens to
your eyesight (p. 32).
Monitoring the still image on the LCD screen
(p. 136)
1Set the POWER switch to MEMORY or VCR.
The MEMORY or VCR lamp lights up.
2Press PLAY or PB. The last recorded image is
displayed.
Note
Do not pick up your camcorder by
the LCD panel or the jack cover.
1Remove the lens cap.
3Open the LCD panel. The
picture appears on the
LCD screen.
4Press
PHOTO
lightly.
5Press
PHOTO
deeper.
When the green z mark
stops flashing, then lights up,
you can record a still image.
The image when you pressed
PHOTO deeper will be
recorded on a “Memory
Stick.”
MEMORY/NETWORK
CAMERA
(CHG)
OFF
ON
MODE
VCR
POWER
PLAY
PB
or
2Set the
POWER
switch to
MEMORY.
The
MEMORY
lamp lights
up.
MEMORY/NETWORK
CAMERA
(CHG)
OFF
ON
MODE
VCR
POWER