Filter
Top Products
109
“Memory Stick” Operations
Selecting the size of still image
You can select either of two still image sizes.
1600 × 1200 or 640 × 480. (When the POWER switch is set to CAMERA or VCR,
the image size is automatically set to 640 × 480.)
The default setting is 1600 × 1200.
(1) Set the POWER switch to MEMORY.
(2) Press FN to display PAGE1.
(3) Press MENU, then select STILL SET (still image) in
in the menu setting,
then press EXEC (p. 181).
(4) Press r/R to select IMAGESIZE, then press EXEC.
(5) Press r/R to select the desired image size, then press EXEC.
The indicator changes as follows:
1600 640
Note
When still images recorded on your camcorder in 1600 × 1200 size are played back on
other equipment that does not support 1600 × 1200 size, the full image may not appear.
Using a “Memory Stick” – Introduction
2
FN
3-5
1
EXIT
RET.
EXEC
1600 × 1200
640 × 480
REMAIN
40
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
EXIT
RET.
EXEC
OFF
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
EXIT
RET.
EXEC
640 × 480
REMAIN
40
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
640
MENU
MEMORY/NETWORK
CAMERA
(CHG)
OFF
ON
MODE
VCR
POWER