Filter
Top Products
87
Editing
Using the Remote Commandaer
You don’t need to perform step 4.
In step 5, press both z REC and the right button simultaneously to start recording.
Notes
•When an incompatible picture (such as one recorded with the DV format) is input, the
message “INPUT ERROR” appears.
•You can connect one VCR only using the i.LINK cable.
•First, start playback or turn to the playback pause mode before your camcorder starts
recording or turns to the recording pause mode. If no signal is input into your
camcorder, the message “NO INPUT” appears and the camcorder cannot start
recording.
Note on playback pause pictures
When you record a playback pause picture:
•The recorded picture becomes rough when recorded through the i.LINK (MICROMV
Interface).
•The picture may jitter when you play back the tape on other video equipment. And
there may be a time-lag when you play back the tape on other video equipment.
Before recording
Make sure if the MPEG IN indicator appears on the LCD screen. The MPEG IN
indicator may appear on both equipment.
REC
Recording video or TV programs