Filter
Top Products
51
Advanced Recording Operations
Self-timer recording
You can record still images with the self-timer. You can also use the Remote
Commander for this operation.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press FN to display PAGE1.
(3) Press SELFTIMER.
The
(self-timer) indicator appears on the LCD screen.
(4) Press EXIT to make PAGE1 disappear.
(5) Press PHOTO deeper.
The self-timer starts counting down from about 10 with a beep. In the last two
seconds of the countdown, the beep gets faster, then the recording starts
automatically.
To cancel self-timer recording
Press SELFTIMER so that the (self-timer) indicator disappears from the LCD screen
while your camcorder is in the standby mode. You cannot cancel the self-timer
recording using the Remote Commander.
Note
The self-timer recording is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to (CHG) OFF or VCR.
During recording on the tape
You cannot use self-timer recording.
Recording still images on a “Memory Stick” in CAMERA mode
5
2
FN
3
SELF
TIMER
PHOTO