Filter
Top Products
114
(1) Set the POWER switch to MEMORY.
(2) Press FN to display PAGE1.
(3) Press MENU, then select STILL SET in
in the menu settings, then press
EXEC (p. 181).
(4) Press r/R to select BURST, then press EXEC.
(5) Press r/R to select the desired settings.
(6) Press EXIT to make the menu settings disappear.
(7) Press PHOTO deeper.
If the “Memory Stick” becomes full
“ FULL” appears on the LCD screen, and you cannot record still images on this
“Memory Stick.”
The number of still images in continuous shooting
The number of still images you can shoot continuously varies depending on the image
size and the capacity of the “Memory Stick.”
During recording still images continuously
The flash does not work.
When shooting with the self-timer function or the Remote Commander
Your camcorder automatically records up to the maximum recordable number of still
images.
When selecting HIGH SPEED
Flickering or changes in color may occur. Also, your camcorder prevents focusing on
near objects.
If the remaining capacity of the “Memory Stick” is less than three images
EXP BRKTG does not work. When you press PHOTO lightly, “ FULL” appears on
the screen.
3,4
2
FN
7
MENU
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
EXIT
RET.
EXEC
OFF
NORMAL
HIGH SPEED
EXP BRKTG
MULTI SCRN
Recording still images on a “Memory Stick”
– Memory photo recording