Sony DCR-IP210E Camcorder User Manual


 
172
Bewegende beelden
overnemen vanaf andere video-
apparatuur
Voor u beelden gaat overnemen
Zet het onderdeel DISPLAY onder in het
instelmenu op “LCD”. (De oorspronkelijke
instelling is ook “LCD”.)
(1)Zet de POWER schakelaar in de “VCR” stand.
(2)Bij gebruik van het audio/video-aansluitsnoer
zet u het menu-onderdeel VIDEOINPUT in de
juiste stand, afhankelijk van welke stekker u
gebruikt voor de weergavebron (zie blz. 238).
(3)Start op uw videorecorder de weergave van
de videocassette met de gewenste opnamen of
schakel het TV-toestel in om het gewenste
programma te zien.
De beelden van de aangesloten apparatuur
worden nu ook weergegeven op het scherm of
in de zoeker.
(4)Druk op de START/STOP toets bij de scène
waar u wilt beginnen met opnemen.
Opnemen via het audio/video-
aansluitsnoer
Als uw TV-toestel of videorecorder een S-
video ingangsaansluiting biedt
Dan kunt u de apparatuur aansluiten met de S-
videostekker aan het aansluitsnoer, voor de beste
beeldkwaliteit. Bij deze wijze van aansluiten
hoeft u de gele (video) stekker van het audio/
video-aansluitsnoer niet aan te sluiten. Steek de
S-video stekker in de S-video stekkerbus van uw
videorecorder.
Bandopnamen van een cassette
overnemen als bewegende
beelden
Recording a moving picture
from other equipment
Before operation
Set DISPLAY in to LCD in the menu settings.
(The default setting is LCD.)
(1)Set the POWER switch to VCR.
(2)When using the A/V connecting cable, set
VIDEOINPUT to the appropriate position
depending on the player. (p. 230)
(3)Play back the recorded tape on the VCR, or
turn the TV on to see the desired programme.
The image of the other equipment is
displayed on the LCD screen or in the
viewfinder.
(4)Press START/STOP at the scene where you
want to start recording from.
Using the A/V connecting cable
If your TV or VCR has an S video jack
Connect using the S video plug to faithfully
obtain original pictures. With this connection,
you do not need to connect the yellow (video)
plug of the A/V connecting cable. Connect the S
video plug to the S video jack of the VCR.
Recording a picture from a tape
as a moving picture
S VIDEO
VIDEO
AUDIO
OUT
A/V
Yellow/Geel
Black/Zwart
: Signal flow/Signaalstroom
A/V connecting cable (supplied)/
Audio/video-aansluitsnoer (bijgeleverd)
VCR/Videorecorder
White/
Wit
Red/
Rood