Filter
Top Products
228
Changing the menu settings
FLASH LVL
You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the flash level.
English
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The LCD screen shows only the items you can operate at the moment.
Menu items are displayed as the following
icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEMORY SET
CM SET
TAPE SET
SETUP MENU
OTHERS
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
RED EYE R
FLASH LVL
WHT BAL
SHARPNESS
AUTO SHTR
Mode
——
——
z OFF
ON
HIGH
z NORMAL
LOW
——
——
z ON
OFF
Meaning
To suit your specific shooting requirement (p. 81)
To add special effects like those in films or on the TV
to images (p. 76, 91)
Red-eye reduction does not function.
Preliminary flash before recording prevents red-eye.
To make the flash level higher than normal.
To use the normal setting.
To make the flash level lower than normal.
To adjust the white balance (p. 69)
To adjust the sharpness of the image outline with R/r.
To automatically activate the electronic shutter when
shooting in bright conditions
To not automatically activate the electronic shutter
even when shooting in bright conditions
POWER
switch
CAMERA
MEMORY
CAMERA
VCR
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
soften image sharpen image
De hoofdpunten van het instelmenu worden
aangegeven als de volgende pictogrammen:
MANUAL SET (Handmatige instellingen)
CAMERA SET (Camera-instellingen)
VCR SET (Videorecorder-instellingen)
LCD/VF SET
(LCD scherm/Beeldzoekerinstellingen)
MEMORY SET (Geheugen-instellingen)
CM SET (Cassettegeheugen-instellingen)
TAPE SET (Cassette-instellingen)
SETUP MENU (Algemene instellingen)
OTHERS (Overige instellingen)
Wijzigen van de oorspronkelijke
menu-instellingen