Filter
Top Products
11
Getting started
Using an external power source
, Connect the AC-LM5 AC power
adaptor (supplied) to the multi
connector of the camera.
When placing the camera, make sure the
LCD screen is facing up.
• Remove the battery pack when using an
external power source.
• Connect the AC power adaptor to an easily
accessible wall outlet (wall socket) close by. If
some trouble occurs while using the adaptor,
immediately shut off the power by
disconnecting the plug from the wall outlet
(wall socket).
1
AC power adaptor
Multi connector
v mark
, Connect the power cord (mains
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
• When you have finished using the AC power
adaptor, disconnect it from the multi connector
of the camera.
• The set is not disconnected from the AC power
source as long as it is connected to the wall
outlet (wall socket), even if the unit itself has
been turned off.
2
2 To a wall outlet
(wall socket)
Power cord
(mains lead)
1
Using your camera
abroad
Power sources
You can use your camera in any country or
area with the supplied AC power adaptor
within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
[a], if necessary, depending on the design of
the wall outlet (wall socket) [b].
• Do not use an electrical transformer (travel
converter), as this may cause a malfunction.
AC-LM5