Filter
Top Products
88
Others
Symptom Cause Solution
The camera does not
work, no operations can
be performed.
• You are not using an “InfoLITHIUM” battery
pack.
• The battery level is low or zero (The
indicator appears.).
• The AC power adaptor is not connected
securely.
pUse an “InfoLITHIUM” battery pack only (page 102).
pCharge the battery (page 8).
pConnect it securely to the multi connector of the camera and to
a wall outlet (wall socket) (page 11).
The power is on, but the
camera does not work.
• The internal system is not working properly. pDisconnect, and then, after one minute, reconnect all power
sources and turn on the camera. If this does not work, press the
RESET button located inside the battery/“Memory Stick” cover
with a pointed object, then turn the power on again. (This will
clear the date and time settings, etc.)
You cannot identify the
indicator on the LCD
screen.
— pCheck the indicator (pages 104 to 106).
The lens gets fogged. • Condensation is occurring. pTurn off the camera, leave the camera for about an hour and then
try to use it again (page 100).
The camera gets hot if you
use it for a long time.
— pThis is not a malfunction.