Filter
Top Products
74
Copying images without
using “Image Transfer”
– Windows 98/98SE/2000/Me
If you do not set to launch “Image Transfer”
automatically, you can copy images as
following procedure.
a Double-click [My Computer],
then double-click [Removable
Disk].
The contents of the “Memory Stick”
inserted in your camera appear.
• This section describes an example of copying
images to the “My Documents” folder.
• When the “Removable Disk” icon is not shown,
see the right column.
• When using Windows XP, see page 75.
b Double-click [DCIM], then
double-click the folder that the
image files you want to copy
are stored.
The folder opens.
c Right-click the image file, then
click [Copy].
d Double-click the “My
Documents” folder and right-
click on the “My Documents”
window, then click [Paste].
The image file is copied to the “My
Documents” folder.
When you try to copy an image
to a folder in which an image
with the same file name is stored
The overwrite confirmation message
appears. When you overwrite the existing
image with the new one, the original file
data is deleted.
Changing a file name
When you want to copy an image file to
your computer without overwriting a file
with the same name, change the file name.
Once you change the name, the image
cannot be played back on your camera. If
you want to play back the image on your
camera. follow the procedures on page 78.
When a removable disk icon is
not shown
1 Right-click [My Computer], then click
[Properties].
The “System Properties” screen appears.
• For Windows 2000 users, click the [Hardware]
tab on the “System Properties” screen.
2 Confirm if other devices are already
installed.
1Click [Device Manager].
2Confirm if there is a “ Sony
DSC” under [ Other Devices].
3 If you find either of the devices above,
follow the steps below to delete them.
1Click [ Sony DSC]. (For
Windows 2000 users, right-click
[ Sony DSC].)
2Click [Remove]. (In case of
Windows 2000, click [Uninstall].)
The “Confirm Device Removal”
screen appears.
3Click [OK].
The device is deleted.
Try the USB driver installation again using
the supplied CD-ROM (page 69).