Filter
Top Products
9
Getting started
, Connect the power cord (mains
lead) to the AC power adaptor
and to a wall outlet (wall
socket).
When the /CHG lamp goes out, charging is
finished.
• After charging the battery pack, disconnect the
AC power adaptor from the multi connector of
the camera.
To remove the battery pack
Open the battery/“Memory Stick” cover,
and push down the battery eject lever in the
arrow direction as illustrated above.
• Be careful not to drop the battery pack when
removing it.
Battery remaining indicator
The battery remaining indicator shows the
remaining shooting or viewing time.
• When turning the LCD screen off and on, it
takes about one minute to calculate the proper
remaining time.
• A proper remaining time may not be indicated
depending on conditions of use or
circumstances.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC-LM5
AC power adaptor at a temperature of 25°C
(77°F).
4
Power cord
(mains lead)
AC power adaptor
2 To a wall outlet
(wall socket)
1
/CHG
/CHG lamp
Battery eject lever
Battery pack Full charge
(min.)
NP-FC11 (supplied) Approx.150
60
min
2272
8
101