Filter
Top Products
12
Turning on/off your camera
There are following two ways to turn on the
camera.
1 Press POWER.
The POWER lamp lights in green and the
power is on. When you turn on the camera
for the first time, the CLOCK SET screen
appears (page 14).
To turn off the power
Press POWER again, the POWER lamp
goes out, and the camera turns off.
• To turn off the start-up sound, set [BEEP] to
[OFF] in (SETUP 1) in the SET UP
settings (page 99).
2 Rotate the lens portion.
Rotating the lens portion in the arrow
direction turns on the camera. To turn off
the power, rotate it back.
The Auto Power Off function
If no tasks are performed for a while* when
shooting, viewing images, or setting up the
camera while using the battery pack, power
is automatically shut off to preserve battery
power.
However, in the following circumstances,
even if the battery pack is being used to
power the camera, the Auto Power Off
function will not work.
• Movies are being played back
• A slide show is being shown
• During USB connection
* When [POWER SAVE] is set to [ON]:
approximately 90 seconds
When [POWER SAVE] is set to [OFF]:
approximately three minutes
MODE
POWER
POWER
POWER lamp