Filter
Top Products
20 (GB) Chapter 2 Operation
Chapter 2
Adjusting and Setting with Menus
Selection
AE AREA
(Continued)
AE SPEED
AE DETECT
Function
3 Move the cross cursor appearing at the right
bottom corner with the B, b, V or v button to set
the lower and right side size, then press the
ENTER button.
Move Cross Cursor
Move Window
Cancel
MENU
Back
BARS
Fix
ENTER
4 Move the AE window to the desired position with
the B, b, V or v button, then press the ENTER
button.
Note
To cancel the setting before completing the
procedure, press the MENU button.
Sets auto exposure focusing speed in AGC, CCD
IRIS or auto-iris control mode.
Selects from MID (normal speed), FAST (fast speed)
and SLOW (slow speed).
Note
If lens hunting occurs, adjust with AE SPEED.
Selects the detection method of the luminance level
of the selected AE window.
AVERAGE: Selects to detect the average luminance
level of the whole AE window.
PEAK: Selects to detect the part with the highest
luminance level.
CONTRAST menu
Adjusts the contrast of the image.
Setting items in the CONTRAST menu
<CONTRAST>
>EFFECT
KNEE POINT
BLACK STRETCH
GAMMA
LEVEL
MASTER PEDESTAL
R. PEDESTAL
B. PEDESTAL
Select
[A]
MANUAL
MID
0
ON
0
0
0
0
Back
MENU
+_
+_
+_
+_
+_
Setting item
EFFECT
KNEE POINT
BLACK
STRETCH
GAMMA
LEVEL
MASTER
PEDESTAL
R./B.
PEDESTAL
Contents of setting
Adjusts the picture contrast in
accordance with the incident
luminance level.
Sets the knee point.
Adjusts the luminance of a dark
portion of the screen.
Activates gamma compensation.
Adjusts the gamma level.
Sets the pedestal level of the output
signal.
Finely adjust the pedestal level.
Ref. page
21
21
21
21
21
21
22