Filter
Top Products
38 (GB) Chapter 2 Operation
Chapter 2
Shooting
Adjusting the Black Balance
Adjust the black balance first, after you turn on the power of
your camera.
2
31
Operation procedure
1 If any menu is displayed on the screen, press the MENU
button to remove it.
2 If a color bar signal is displayed on the screen, press the
BARS button to remove it.
3 Press the BLACK button.
The lens iris control is automatically closed, and the
black balance is adjusted. If you use a manual-iris lens,
close the iris then press the BLACK button.
While adjusting, the bars are displayed. When the
adjustment is completed, the message “BLACK: OK”
appears on the screen.
Black balance adjustment errors
If the black balance adjustment is not successful, the
message “BLACK: NG” appears on the screen. If this
happens, take the necessary measures and perform steps 1
through 3 again.
For details, see “List of Messages” on page 60.
MENU
BLACK
BARS
ENTER
FILE
SELECT
WHITE